Ukusekelwa kwe-spindle kusebenzisa ikhwalithi ephezulu, ukunemba okuphezulu, ama-bearings anesivinini esikhulu, kanye ne-spindle frequency conversion conversion regulation engenasinyathelo.I-shaft eyinhloko ingafakwa i-servo main shaft motor kanye ne-servo drive, enciphisa isikhathi sokuqala kanye ne-brake ngo-50%.Isivinini esincane sokusika se-shaft eyinhloko singama-50r/min.
I-lathe iqhutshwa izikulufu zebhola ezinembayo zokuhamba eziqondile nezivundlile.
Ivikelwe ngokugcwele noma ivikelwe kancane, isisekelo sombhede wonke, izintambo zokuqondisa umbhede ziyacishwa futhi zigaywe kahle nge-ultrasonic frequency, kanye nama-sliding guide rails wonke ane-plastic-laminated.
Okuthunyelwe kwethuluzi kunokuthunyelwe kwethuluzi lomugqa noma okuthunyelwe kwamathuluzi eziteshi ezine, noma okubili kungaxutshwa ukuze kwandiswe inani lamathuluzi, angakhethwa umsebenzisi.
I-chuck, i-spring chuck kanye ne-tailstock inezinketho ze-manual, hydraulic kanye ne-pneumatic.
Ukucushwa okuyinhloko kwesistimu ye-CNC: KND, GSK, FANUC, Siemens, HNC, abanye bazikhethela ngabasebenzisi.
| Into | CK6130 |
| Ubukhulu.swing dia.phezu kombhede | 300mm |
| Ubukhulu.swing dia.phezu kwe-cross slide | 100mm |
| Ubukhulu.ubude bokucubungula | 400mm(collet) |
| Dia.wembobo yokuphotha | 48mm |
| Ngembobo dia.yokudweba ipayipi | 41 mm |
| Isivinini se-spindle | 150-2500rpm |
| Isiphathi samathuluzi | umbambi wamathuluzi wohlobo lwegenge |
| Isigaba sebha yamathuluzi | 20x20 16X16mm |
| Amandla emoto amakhulu | 4kw |
| I-X/Z axis travel Stoke(mm) | 300/380 |
| Isivinini sokuphakela esisheshayo se-eksisi ye-X/Z | 8/10 m/min |
| Ukunemba kwendawo ye-eksisi ye-X/Z(mm) | 0.01/0.015 |
| Ukuphindaphinda kwe-X/Z-eksisi(mm) | 0.012/0.013 |
| I-tailstock sleeve dia. | 60mm |
| Uhambo lwemikhono ye-tailstock | 100mm |
| I-Tailstock taper | MT4 |
| Ubukhulu | 1750X1200X1570 |
| isisindo | 1220kg |
| Ukucushwa: | Ukucushwa ongakukhetha: |
| I-GSK 928TD-L | I-hydraulic chuck noma i-collet |
| Auto lubrication system | 4 isibambi samathuluzi kagesi esiteshini |
| Uhlelo lokukhanyisa | 6 isibambi samathuluzi kagesi esiteshini |
| Isistimu yokupholisa | |
| I-pneumatic collet | |
| 380V 3 isigaba(uma indawo yangakini inesicelo esikhethekile pls usazise | |
1.Ukusakaza: I-HT300 resin sand-resistant-resistant castings inokuminyana okuphezulu kanye nokumelana okuhle nokugqokwa!Isihlalo sehhashi samukela isakhiwo sokulingisa esinezendlalelo ezimbili, futhi isakhiwo sekholomu esikhulu esimise okwe-A sibonisa ikhono lokusika eliqinile.
2. I-Spindle: yamukela i-Taiwan high-speed spindle 8000rpm, isakhiwo esilula nesihlangene, ukusebenza kahle okuphezulu, umsindo ophansi, ukudlidliza okuphansi nokunemba okuphezulu.
3.Isikulufu: Isikulufu somhlahlandlela sithatha isikulufu esingenisiwe se-JIS-C3 sokugaya i-nati eseluliwe ngaphambili ukuze sisuse i-backlash, ngemva kokwelashwa kokushisa, sinokuqina okuhle, ukumelana nokugqoka, futhi siqinisekisa ukunemba okuphezulu komsebenzi.
4. Ukushintsha kwamathuluzi okuzenzakalelayo: Uhlobo lwesigqoko sase-Taiwan (imibese engu-16) umagazini wamathuluzi.Izinzuzo: ukuguga okuphansi, impilo ende, ukulungisa okulula, nezinga lokuhluleka eliphansi.
5.Ukuhlola: Yonke imishini yefekthri idlule ezinyathelweni zokuhlola ukuphazamiseka kwe-laser, umshini wokukopisha, ukulinganisa kwangempela, njll.Qinisekisa ukuthi
izinga lokukhiqiza lomkhiqizo ngamunye
| Into | ||
| Usayizi wethebula lokusebenza(ubude×ububanzi)mm | 1000*400 | 1000×500 |
| Isikhala se-T (mm) | 5-18x100 | 5-18x100 |
| Isisindo esiphezulu sokulayisha etafuleni lokusebenza | 500KG | 600kg |
| Uhambo lwe-X-Axis(mm) | 800 | 800 |
| Uhambo lwe-Y-Axis(mm) | 500 | 500 |
| Uhambo lwe-Z-Axis(mm) | 500 | 500 |
| Ibanga phakathi kwekhala lokuphotha kanye netafula | 105-550 | 105-605mm |
| Ibanga phakathi kwesikhungo sokuphotha kanye nekholomu(mm) | 450 | 550 |
| I-spindle taper | I-BT40-140 | I-BT40-150 |
| Ubukhulu.isivinini sokuphotha (rpm) | 8000/10000/12000 | |
| Amandla e-spindle motor (Kw) | 5.5KW | 7.5/11kw |
| Isivinini sokudla esisheshayo: X,Y,Z i-eksisi m/min | 16/16/16 (24/24//24 liner guidway) | |
| Isivinini sokusika ngokushesha m/min | 10m/min | |
| Ukunemba kwesikhundla | ±0.005 mm | ±0.005 mm |
| Phinda ukunemba kwesikhundla | ±0.003 mm | ±0.003 mm |
| Uhlobo lokushintsha Ithuluzi Le-Auto | 16 amathuluzi ikhanda lohlobo lokushintsha ithuluzi (ongakukhetha 24 izingalo uhlobo auto ithuluzi Tjhugulula) | |
| Ubukhulu.ubude bethuluzi | 300mm | |
| Ubukhulu.Ububanzi bethuluzi | Φ80(ithuluzi eliseduze)/φ150(ithuluzi elingelona eliseduze) | |
| Max.ithuluzi isisindo | 8kg | |
| Isikhathi sokushintsha ithuluzi (ithuluzi-kuya-ithuluzi) | 7 isekhondi | |
| Umfutho womoya | 0.6 Mpa | |
| Isisindo somshini | 4200KG | 5500KG |
| Ubukhulu bebonke(mm) | 2600*2300*2300 | 2600*2300*2300 |
Isikhathi sokuthumela: Sep-02-2021